PENETRA HYBRID MAX

WATERPROOFING PENETRANT

Description

VKFLEX PENETRA HYBRID MAX is a transparent and hybrid-structured waterproofing penetrant that can be applied to wet and damp surfaces. It penetrates deeply into the micro-capillary voids within mineral-based surfaces, sealing the paths where water can travel from the inside. It does not form a film on the surface; it integrates with the structure to provide long-lasting waterproofing.

Advantages

In-depth waterproofing through deep penetration
Transparent structure – does not change the surface appearance
Non-film forming, preserves breathability
Effective sealing in micro-capillary voids
Long-lasting and permanent protection
Easy and fast application

Technology

Micro-Capillary Sealing Technology moves along the capillary voids within the surface to stop the capillary action of water, creating permanent protection within the structure.

Usage Areas

Concrete and reinforced concrete surfaces
Screed and plastered surfaces
Natural stone, brick, aerated concrete
Under-surfaces of terraces and balconies
Areas exposed to water from both negative and positive directions
Mineral surfaces with risk of moisture and leakage

Application Instructions

Surface Preparation

The application surface must be clean, sound, and absorbent. The surface should be free of dust, oil, and loose particles. If the surface is dry, it must be dampened before application. Any standing glossy water on the surface should be allowed to recede before starting the application.

Application Method

The product is applied by brush, roller, or low-pressure spray. The first coat should be applied without dilution until the surface reaches saturation. The second coat should be applied by diluting with water at a ratio of 1:4. The waiting time between coats should be 2 hours.

Technical Specifications

Appearance	Transparent Liquid
Chemical Structure	Hybrid Water-Based Reactive System
Density (20 °C)	1.01 – 1.05 g/cm³
pH (20 °C)	7.5 – 8.5
Viscosity	Low – Fluid
Volatile Organic Compound (VOC)	< 30 g/L
Film Formation	Does not form a film
Penetration Depth	Surface dependent (average 3 – 10 mm)
Water Repellency	High
Solvent	None
Color	Colorless / Transparent
Application Temperature	+5 °C to +35 °C
Service Temperature	-20 °C / +80 °C
Flammability	Non-flammable
Consumption	200 – 400 ml/m²
Number of Coats	1 – 2 Coats
Drying (Touch)	1 – 2 Hours
Full Performance	7 Days
Packaging	5 L – 20 L / PE Jerrycan
Shelf Life	12 Months