DECORATIVE TRANSPARENT EPOXY CASTING RESIN
VKFLEX EPOXY ARTCAST is a high-transparency, two-component epoxy casting resin developed for decorative casting, artistic designs, and special surface applications. Thanks to its controlled curing feature, it creates smooth, glossy, and aesthetic surfaces.
Surfaces must be dry, clean, and free of dust. Oil, dirt, and loose particles must be completely removed. For wooden surfaces, the moisture content must be below 12%.
Components A and B must be weighed with a precision scale according to the specified ratios. They should be mixed with a low-speed mixer for at least 2-3 minutes without entraining air. After mixing, air bubbles can be reduced by vacuuming or resting the mixture. The prepared mixture must be applied within the POT LIFE period.
| Appearance | Transparent |
| Component Structure | 2-component (A+B) |
| Mixing Ratio | 100:50 (By weight) |
| Density (20 °C) | 1.05 g/cm³ |
| POT LIFE (23 °C) | 30 – 40 minutes |
| Touch Dry | 12 – 18 hours |
| Full Curing | 7 days |
| Application Temperature | +15 °C / +30 °C |
| Max. Casting Thickness | 20 – 30 mm |
| Hardness (Shore D) | 80 |
| Consumption | Approximately 1 kg/m² for 1 mm thickness |
| Shelf Life | 12 months |
POOL PAINT
ELASTOMERIC RESIN-BASED TOPCOAT PAINT
THERMOPLASTIC RESIN-BASED MOISTURE AND DAMPNESS PAINT
THERMAL INSULATION COATING
Complete the form to accelerate your transformation, and our team will reach out to you shortly.
